FloodStop System for Water Heaters - Compression Fit Reviews
Other Picture
FloodStop System for Water Heaters - Compression Fit Feature
- Motorized Full-Port Ball Valve (3/4 inch compression ends)
- Control Unit (with Battery Backup 4 X C Size)
- Water/Leak Sensor (1.25" X 7.5")
- AC Power Adaptor (or use 4 X C Batteries as Primary Power Source)
- Output Contact Wires - approx 3ft to valve and approx 7ft to sensor
Prevent Water Heaters from flooding your property:
Water Heaters have a limited life, then leak after years of corrosion. Water Heaters are generally considered a maintenance-free appliance, but they are also one of the single most damaging appliances in the home. Because Water Heaters are continually under pressure, even small pressurized leaks can quickly flood and devastate a home. Whether at home, at work, or on vacation these flooding events can go undetected for hours or even days.
The FloodStop (FS 3/4-C) kit automatically shuts off the water supply to the Water Heater and sounds an alarm, leaving all other household fixtures and appliances operational. Powered by AC Adaptor/Transformer or Batteries. Output contacts available, which allow the Controller to connect with Alarm, Home Automation or Auto-Dialer systems if desired. Easily installed in fifteen minutes. 1-Year Manufacturer's Warranty.
The FloodStop Water Heater models can also be used on main water supply for the whole house as long as the size of the FloodStop is equal to or greater than the size of your main supply. Additional Sensors can be added by wiring one sensor to another in a chain format. There is no max # of sensors; however you will want to use a larger gauge (20AWG or larger) if splicing more than 50 feet to the furthest sensor.
Visit Store Now !!
Mar 21, 2011 07:36:04
No comments:
Post a Comment